Megado - without Dobby

Dobby looms have a dobby system, which is used to program the harness combinations for the weave pattern. Dobby is short for ′′draw boy′′ which refers to the weaver’s helper who was used to control the warp thread by pulling on draw threads. The dobby mechanism replaces the treadle/lam combination of the traditional floor looms. The performance of a multi-harness loom is vastly improved by using a dobby mechanism, as it overcomes the major problems associated with the use of a large number of treadles.

A dobby loom allows you to select the combination of shafts for every shed opening you wish to make. The great advantage of a dobby loom is that it avoids the necessity and the labour involved in making multiple tie-ups to treadles, positioned underneath a loom. An investment in a Louët Dobby ensures many years of comfortable, ergonomic and productive weaving.

A mechanical dobby is a program bar with pegs. The numbered holes in the program bars correspond with shafts of the loom. If you want a shaft to be lifted, you place a peg in the corresponding hole of the program bar. The number of program bars forming the chain, correspond to your weaving pattern. However, if the number of program bars becomes very large, you may want to consider an electronic dobby due to cost and functionality.

The electronic interface will give you almost unlimited shaft combinations using either the built in Louet web interface software, or a computer and 3rd party software from Fiberworks PCW, Pointcarre Dobby Textile software, Patternland, Weavemaker, Weave It, WeavePoint, Winweef or Pro Weave, which all work with the Louët electronic interface.

Both Octado and Megado looms feature a counter march shed. This is accomplished by lifting the back beam at the same time as the shafts are being lifted. The beam movement also compensates for changes in warp tension as the shed is made. An innovative construction ensures the action of the well-balanced treadle, very light in operation. This main treadle and also the optional weaving bench are adjustable in height to accommodate the weaver’s physical requirements.  Adjusting blocks can be added to the treadle and footrail to ensure a comfortable weaving position.

For information on the electronic dobby, see the Dobby 2.0 item # WA0298 or WA0299

For information on the electronic dobby, see the Dobby 2.0 item # WA0298 or WA0299

The electronic Dobby 2.0 will give you almost unlimited harness combinations using  the proprietary Louet software and Wifi connection to a tablet, or a computer and software from Fiberworks PCW, Patternland, Weavemaker, Weave It, WeavePoint or Pro Weave.   INTRO TO LOUET DOBBY 2.0 SOFTWARE

Megado is made of lacquered ash hardwood and the most complex castle section is pre assembled. Included are: a large shelf, built-in raddle, a stainless steel reed 40-10 (metric), 900/1400/1600 Texsolv heddles (392 mm), lease and tie-up sticks and sixteen warp sticks.

ASSEMBLY VIDEO

Dimensions (wxdxh)

• Megado 70 - 121 x 127 x 131 cm (47 5/8" x 50" x 51 5/8")
• Megado 110 - 161 x 127 x 131 cm (63 3/8" x 50" x 51 5/8")
• Megado 130 - 181 x 127 x 131 cm (71 1/4" x 50" x 51 5/8").

Weight: 

• Megado 40 - 63 kg (138 lb),
  
• Megado 70 - 69 kg (152 lb),
• Megado 90 - 76 kg (166 lb),
  
• Megado 110 - 84 kg (185 lb),
• Megado 130 - 92 kg (203 lb)
• Add 13 kg (29 lb) for 32 harness loom.

Artitcle codes
WP0152: Megado 40-32 – without control
WP0134: Megado 70-32 – without control
WP0154: Megado 90-32 – without control
WP0140: Megado 110-32 – without control
WP0146: Megado 130-32 – without control

Available Accessories:

• Adjustable bench - 59 - 72 cm (23 1/4"-28 3/8")
• Tilting set for bench
• Second warp beam with back beam
• Sectional warp beam
• Flying Dutchman shuttle
• Fly shuttle device 
• Treadle height adjusting blocks
• Mechanical dobby, including 60 program bars
• Program bars per ten
• Electronic dobby